Shaanxi Zhongtuo Mine Equipment Co., Ltd.  

Product Name: P450 Super Large Excavator Uses Rock Splitter for Non-Blasting Cracking Model NO.: P450 Condition: New Certificate: CE, ISO Engine Type: Electric Motor Type: Hydraulic Dynamic Form: Hydraulic Block Length mm: 800-1200 Drilling Depth: 1300mm-2100mm Pressure: 24-25MPa Trademark: shangong Transport Package: Wooden Packing Specification: P450 Origin: Xian HS Code: 8467890000 Product Description P450 super large excavator uses rock splitter for non-blasting crackingDescription of Ultra large rock splitters: ultra-large rock splittershydraulic equipment is airborne, need to drill a excavator one. Can drive by pressure. Excavator hydraulic splitter airborne, clean surface and rock between roadbed stonework and rock soil for excavator, make a volley of rock surface increased by drilling equipment, large air compressor selection volley larger the direction or position of the layer rock drilling, drilling in the same section of drill hole porous, distance 1.5-2.5 meters high, the distance between the two holes in 1.5-2.5 meters. ultra large rock splitters toolsCrack width of 4-6 cm.Application of ultra large rock splitters: ultra wedge rock Splitterused in large volume of rock, steep terrain, mountain slope in the upper surface of the dangerous rock, Boulder, and foot from the villagers living area, and high voltage line tower is short, less than the general rock blasting (shallow hole blasting) the minimum distance of 300 meters of the construction project, the construction is very difficult. The lump ore (metals, non-metallic minerals) of the first and two mountain rock disintegration, Ultra Large Rock Splittercollapse, rock quarry mining, large concrete structures and the demolition of all local jobs and other areas.Parametersof ultra large rock splitters: Technical parameters of airborne split machinemodelSplit block lengthmmdrilling depthmnominl workig pressure MPadisruptive forceTcrack widthOpposite hole formMachine weightKGZT220-P90800-9001300mm24-253300-360025-30The chain of manual hole600ZT260-P100950-10001700mm24-254400-520030-25The chain of manual hole650ZTN450-P1001000-12002100mm24-25600030-25The chain of manual hole730Precaution of operating ultra large rock splitters For your better use of our ultra large rock splitters quarryto avoid undue failure of the hydraulic splitting machine, please be sure to observe the following when using the splitting machine and strictly observe:1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division.(Hole depth requirements: splitter front end of the block length + 900mm or more, for example: split block length 600mm, then you must drill more than 1500mm holes can be used before the split machine)2. Each splitter splits a certain grease after splitting 3-5 holes to reduce the friction between the wedge and the splitter.3. Do not use the splitter gun as a crowbar to use!